UV-LED resin in 25g

Shiny and transparent, UV'GLASS Resin is a ready-to-use liquid resin for use with a UV-LED lamp. The latter allows the UV-LED resin to harden very quickly, in 1 minute! It does not require mixing and therefore no waste of resin. It does not bubble and does not yellow. It is ideal to use with molds, glass, plastic, jewelry... Make endless creations by adding dried flowers, gold leaf, color pigments or even glitter. ⬨Instructions : 1. Choose the mold (LCC19-M1, M2, M4 or M5), charm, jewelry or other accessory to personalize. Pour a layer of resin (1 to 3 mm depending on the desired thickness) and harden for 1 minute under the lamp. 2. Personalize the creation with dried flowers, glitter or other decorations, then add resin before hardening the creation again for 1 minute under the lamp. 3. Create the desired number of layers while curing the creation under the lamp between each layer of 1 to 3 mm. If necessary, cure the creation under the lamp for longer, until it is completely dry and not sticky. BE CAREFUL, when handling the resin may be hot! ⬨Precautions: Not suitable for children under 12 years old. Read carefully the instructions before use. It is recommended to work in a well-ventilated area and to wear a mask, gloves and protective glasses. É avoid contact with eyes, skin and clothing. In case of contact, rinse immediately. Do not ingest. Protect your work surface to avoid any damage. Do not leave within reach of children. Cleaning tools: acetone or white spirit. ⬨ Information: Capacity: 25g (8 pieces of jewelry, 3 phone cases) Metal, glass, silicone… Use 20°/25° Storage 15°/30° Thickness: 1 to 3 mm Drying: 5 min