LED PIR Motion Detector/Sensor Surface Mount, IP20, White

This Groenovatie LED Motion Detector/Sensor Surface-mounted  has a 360 degree viewing angle and a range of 6 meters. Furthermore, you can easily adjust the “on-time” set from 5 seconds to 10 minutes. With the white color, the sensor fits easily into any type of interior. As soon as movement is detected by the sensor, the connected lighting switches on immediately. The lighting switches off automatically when there is no more movement or when the set time has elapsed. The light sensitivity can also be adjusted from 3 to 2000 Lux. Easy mounting makes this motion detector suitable for all kinds of rooms in and around the house where no moisture can reach it. This motion detector is suitable for both LED lighting and traditional lighting. ;Load of halogen and incandescent lamps: max. 1200W. The input voltage of this LED Sensor is 230V. The dimensions of the sensor are 115x55mm. To know how to install it, we have listed it below for your convenience. Installation1. The L (phase; brown or black) wire of the lamp must be installed in the L-out input of the sensor.2. The L (phase; brown or black) wire of the mains supply (230V) must be installed in the L-in input of the sensor.3. The N (neutral; blue) wire of the lamp én mains supply must be installed in the N input of the sensor. So 2 wires have to go in at the same time. If you place your order on working days before 20:00 and pay, we will ship it the same day for free (with order >€20 ). In addition, with Groenovatie you always have a 2 year warranty and 60 days right of return!