Rubber base "Sincero Salon", Light violet, 6ml

Rubber Base coat will smooth, strengthen and wrap your nails in a beautiful tone. The possibility of nail fracture is significantly reduced with this base. The rubber smoothes the nail plate and at the same time hides all its irregularities. The viscous consistency does not run into the cuticles and is extremely easy to form a shape. Method of use: 1. Disinfect your hands and perform a manicure. 2. Degrease the nail plate and wipe off the dirt with a Sincero Salon dehydrator. 3. Apply a minimal coat of Sincero Salon Super Bond if needed. Judge by the type of nail plate (may not be used if the nail plate is greasy). Avoid contact with skin when using this product. 4. Varnish with one thin layer of clear classic base. Dry: UV Lamp 60S, Led Lamp 30S. 5. Varnish Rubber Base coat with a generous, rich layer of rubber. Dry: in UV Lamp 120S or Led Lamp 60S. For more masking, varnish 1 more coat. 6. Apply Top Coat to the nail with the selected top coat. 7. Dry: UV Lamp 120S, Led Lamp 60S. Removal: 1. Remove the top coat with varnish. 2. Soak the wipe in a gel polish remover. Place on the entire surface of the nail and wrap your fingers in foil to prevent the product from evaporating and the heat to remain inside. 3. Hold for 7-10 minutes, then check the condition. Some colors may take longer. 4. Soak for another 5 minutes if necessary. 6. Remove the foil from your fingers and gently wipe the varnish with a wooden spatula. Recommendation: Do not use force when removing the varnish. It is better to polish the residue easily.