PROFESSIONAL HAIR CLIPPER STEEL FADING 6000

Superior performance professional hair clipper thanks to its high-power 6000 rpm motor, and great duration, power and useful life. It has a special adjustable chrome steel blade for gradients from 0.8 to 2.5 mm, without the need to use combs. Its ergonomic design makes it easy to handle when working. With cutting length adjustment lever and 4 interchangeable 3/6/9 and 12mm combs to cover all needs. Its cable is 2.3m long and includes the maintenance kit with oil and cleaning brush. How to use: Adjust the position of the lever to adjust the length of the hair to be cut. When the lever is in the highest position, the blades will give you the shortest cut. Pushing the lever down gradually increases the length of cut. Position the combs as needed 3mm, 6mm, 9mm, 12m spacing If extremely thick haircut has jammed the blades move the lever to unclog it. It will help you remove stuck hair without removing the blades. Blades need to be realigned if they have been removed for cleaning or replacement, or blade alignment is incorrect Match the teeth of the upper and lower blades with the end of the upper blade teeth, it should be about 1.2mm from the lower blade to avoid shearing the skin Lubrication 1.Add a few drops of oil between the teeth of the cutting blade before cutting 2.Add a few drops of oil to the blades, after aligning, cleaning or replacing the clipper blades Then turn it on for a few seconds to make sure the blades are oiled Use a damp cloth to clean the clipper body to prevent oil from splashing on people's hair Slightly loosen the screws and adjust the blade, tighten the screws after the blade is aligned When power on, power off or while in use, a buzzing/sounding sound may occur It is a normal phenomenon and does not affect the performance of the hair clipper Always keep the slicer clean and oil the blade frequently. Ingredients PVC, METAL