Legionella waterproof thermometer kit - IP66/67

- Resolution 0.1°C - Probes included - IP66/67 protection rating - FREE calibration certificate - FREE Water Allowed Timer - Box of 100 single-use wipes FREE - FREE ABS carrying case Legionnaires' Waterproof Thermometer Kit or Legionella Thermometer Kit with Therma IP66/67 Waterproof Thermometer. This waterproof Legionella test thermometer kit can be used to monitor the temperature of standing water and the surface of pipes and tanks that are part of the water system. The penetration probe can also be used to test the temperature of tap water. The immersion probe must be placed in water at a minimum depth of 25 mm; the tape surface probe can be used to take the temperature of pipes and tanks, and the wire probe can be used to reach places that are difficult or where other probes are not suitable. This kit comes with a traceable calibration certificate. Incorrect water temperature is a key risk factor for Legionella growth. Legionella bacteria multiply in water at temperatures between 20 and 45°C, especially if a nutrient supply is present, such as scale, rust, sludge or algae. A typical method of control is to store cold water below 20°C. Hot water should be stored above 60°C and distributed above 50°C. Current legislation means that if you are the employer or the person controlling the premises, you must organize a risk assessment. The Revised Revised Code of Practice (ACOP) issued by the Government's Health and Safety Executive (HSE) expands on the scope of its guidance on the control of Legionella bacteria in water. The code now applies to all hot and cold water systems in the workplace regardless of their capacity, i.e. the lower limit of 300 liters previously used to exclude domestic systems does not apply. applied more. While household systems can pose a hazard, the code only applies to hazards arising from a work activity. This means that all employers who manage premises with hot/cold water systems and/or a wet cooling system have a legal responsibility to identify any risk of contamination and to prevent or control it. Each Legionella Waterproof Thermometer Kit Contains: - Therma waterproof thermometer - Waterproof penetration probe - Precision ribbon surface probe - PTFE wire probe - Waterproof kitchen timer - Carton of 100 wipes - ABS carrying case Range: -99.9 to 299.9°C (at 0.1°C), 300 to 1372°C (at 1°C) 0.1°C range: -99.9 to 299.9°C 1°C range: 300 to 1372°C Resolution: 0.1°C to 299.9°C then 1°C Accuracy: ±0.4°C, ±0.1% Battery: 3 x 1.5 volt AAA Battery life: minimum 5 years (10000 hours) Sensor type: K thermocouple Display: 15mm AVC Backlight: Yes Dimensions: 32 x 71 x 141mm Weight: 220 grams Housing: ABS plastic with Biomaster antibacterial additive Country of manufacture: United Kingdom 2 years warranty Water/dust resistance: IP66/67 protection rating Measurement scale: Celsius Certification: FREE Traceable Calibration Certificate Complies with standard: EN 13485