Nural- 5 Auto Mirror (1 Tube 0.5 cm³.)

Nural- 5 Auto Mirror (1 Tube 0.5 cm³.). -Tube 0.5 cm³. -Single application case.  The case consists of a tube of adhesive (part A) and a nylon mesh (part B).  The mesh is impregnated with activator and measures 40mm x 40mm.  Remove the support, if it came with the rearview mirror.  Mark exactly on the outside the correct place where the support is going to be placed. -Remove any residue from the previous adhesive that may remain on the support or windshield with a blade.  Before handling the mesh with activator, check that your hands are free of dirt.  Measure the support and cut the mesh to the required size.  Cut the nozzle of the tube (part A) and apply the product evenly on the support so that the entire area is covered.  Carefully place the mesh over the adhesive on the support. -Make sure that the support is in the correct position and place it on the windshield in the position previously indicated.  Keep the holder pressed against the windshield for at least 30 seconds.  Before installing the rearview mirror arm, allow 15 minutes.