Creative Box UV Resin 25ml + UV Lamp 24W + 9 gold/silver accessory pots + 2 molds

Everything you need to learn the UV Resin technique and create up to 8 to 10 pieces of your choice. Contents: 1 x 25g UV resin / 1 x 24W UV lamp / 9 x Gold/silver accessories / 1 x 29 jewels mold / 1 x 9 Christmas shapes mold. ⬨UV'Glass Resin, shiny and transparent, is a ready-to-use liquid resin to be used with a UV-LED lamp. The latter allows the UV-LED resin to harden very quickly, in 1 minute! It does not require mixing and therefore no waste of resin. It does not bubble and does not yellow. It is ideal to use with molds, glass, plastic, jewelry... Make endless creations by adding dried flowers, gold leaf, color pigments or even glitter. 1's. Pour a layer of resin (1 to 3 mm) into a mold and harden for 1 minute under the lamp. 2. Personalize the creation with dried flowers, glitter or other decorations, then add resin before hardening the creation again for 1 minute under the lamp. 3. Create the desired number of layers while curing the creation under the lamp between each layer of 1 to 3 mm. If necessary, cure the creation under the lamp for longer, until it is completely dry and not sticky. If using a mold, turn it over and click the lamp button once. BE CAREFUL, when handling the resin may be hot! Not suitable for children under 12 years. Read carefully the instructions before use. It is recommended to work in a well-ventilated area and to wear a mask, gloves and protective glasses. Éavoid contact with eyes, skin and clothing. In case of contact, rinse immediately. Do not ingest. Protect your work surface to avoid any damage. Do not leave within reach of children. Cleaning tools: acetone or white spirit. ⬨The 24W UV'Glass Lamp allows you to harden all your UV'Glass resin creations quickly. The result is very dry and shiny. Its legs fold up, allowing you to easily carry it with you. If you use a mold, make sure it lets light through. Very easy to use with its 60/120 sec touch button. Dimensions: 16(w) x 6.8(h) x 8.5(d) cm. The lamp must be powered only at low voltage (connected by the USB cable provided, to a computer for example), corresponding to the marking of the device. ⬨The filling accessory kit allows you to embellish your resin creations and add a touch of sparkle to your creativity! Shades specially chosen by designers from the world of resin, with 9 decorative gold and silver accessories, decorations matching the key colors, to embellish your creations for all occasions. They are thin, light and easy to mix into the resin. The colors are mixable to obtain subtle or intense effects depending on your preferences. You can cast them into molds and create jewelry, key chains, personalize your phone case... You can also use them for any other DIY project. The various gold and silver accessories are easy to grab in the pots, which close with their screw cap, so you don't lose any! Contents: 1.5g of fine gold glitter, 1.5g of fine silver glitter, 1g of 3mm gold hexagonal glitter, 1g of 3mm silver hexagonal glitter, 1g of gold mica powder, 1g of silver mica powder, 2 pots of gold leaves, 1 pot of silver leaves. ⬨The Resin'Mould is a high quality silicone mold for resin, it can also be used with other materials such as plaster, waxed concrete, etc. Its specific flexible silicone material allows optimal use with epoxy resins and UV resin. The creations are easily unmolded and the fineness of the mold allows the sparkling shine of the resins to be retained. With the pin integrated into certain molds, you will only have to add a ring after drying and mount your piece on jewelry, key rings, etc. 29 jewel mold: 126*159*8 mm (1g on average for 1 piece). 9 Christmas shapes mold: 115*113*5 mm (2.4g on average for 1 piece).