2x EXEHook toothbrush holder

EXE hook The reusable wall hook The set contains 2 hooks, each for a toothbrush How is the Magic Hook installed? First clean the surface on which you want to stick the hook. Make sure the surface is dry. Now peel off the film on the back of the hook. Place the hook on the cleaned area and push the air out from the center outwards. Can I remove the tick again? Lift the adhesive foil of the hook slightly at one corner. Hold the corner and peel off like a sticker. It comes off easier on smooth surfaces if you heat the hook with a hair dryer. The hook can be used again immediately and, like a suction cup, can always be used in different places Cleaning: Once the back of the hook gets wet, it will no longer stick. Simply wash the back with warm water and a little washing-up liquid. As soon as the surface has dried, it will stick again as before. Tip: If you dry the adhesive side with a hair dryer, the hook will be ready again in a few seconds. Where does the wall hook hold? Glass plastic (window frame) wood (doors) metal stone / concrete mirror Flow caravan walls The specified load capacity (3Kg-5Kg) is an average value. The hooks wear a little more on smooth surfaces and a little less on rough / uneven surfaces. The adhesive film behind the hook is flexible and can therefore also be stuck to round walls (as they are often in caravans). The smaller hooks are sufficient for most applications. The larger ones offer more space for thick jackets / bathrobes.