Wall mounted Propagation Station - Blush

Wall mounted Propagation station in Blush.    Tube includes  1 x Wall bracket  1 x 24mm x 150mm Test Tube  2 x Solid Brass Slot Screws 2 x Red Rawl Plugs   Fixing Steps - Firstly, decide whether which way you would like the bracket.  - Place the bracket to the wall/Surface ensuring it is level and mark the wall where the fixing holes are. - Remove the bracket. Using a 5 drill bit drill two holes deep enough for the Rawl plug. - Once drilled push a Rawl plug into each hole (you may need to use a hammer to lightly tap into place) Ensure that the Rawl Plug is flush with the wall/Surface. - Line the bracket with the holes and slowly screw them in with a flat head screw driver. Do not use a drill or imact driver as this can break the screw or you may slip and mark the bracket.  - Once fixed remove the tissue from the test tube and feed through the bracket.  - Now you are ready to fill with water or soil :)