
Product description: Galvanized steel casing, multiple coatings on the inside, protective coating, 0.6mm thick. Guarantee* on the steel casing 6 years according to the guarantee conditions Handrail and floor rails are made of hard PVC, extremely resilient, UV resistant. Inner foil 0.6mm thick with hanging piping, winterproof, UV-resistant Guarantee* on the pool foil 6 years according to the guarantee conditions Pool depth 1.20m, water depth approx. 1.13m, water volume approx. 8,500 liters Explanation of hanging piping: (German quality pools are supplied with piping foil) 6-year guarantee on pool foil and steel wall according to the guarantee conditions* The inner pool liner is additionally reinforced at the upper edge and shaped in such a way that it is simply hung on the steel wall. The pool liner is a little undersized and therefore lies crease-free on the pool wall when the pool is filled. The plastic handrail is then placed over it and the foil is already in place. (With an overlapping liner, you have to constantly tighten the pool liner when filling and pull it smooth. There are usually folds that you can never get out. The liner hangs over the edge at the top and you have to cut it off. All of this is left to you with our tuck-in liners Saved. In short, before you buy, compare what kind of pool liner is included in the scope of delivery. We sell tuck liners. A little more expensive for quality.) Installation options: This steel wall pool can be installed fully submerged, partially submerged or above ground. Backfilling with lean concrete is necessary when sinking. Due to the high quality of this pool, no concrete retaining walls and floor slabs are required. This saves a lot of work, time and money. Sand filter system Speedzon-4, 8m³/h with 4-way valve for pools up to 30m³ Technical specifications: Pump output approx. 8,000 L/h at 5 m delivery head, self-priming Filter capacity approx. 5,500 L/h 220 to 230 volts and 250 watts Connections 5/4" and 6/4" Boiler height including valve approx. 40cm, boiler diameter approx. 30cm Sand volume approx. 25kg with a grain size of 0.4 to 1.2mm (it is not the pump performance that cleans the water, but the sand. There should always be at least 20kg in the boiler to achieve an optimal cleaning result. With less sand, the water simply becomes pumped through the boiler without much cleaning effect) Degree of protection IP X5 Operating pressure 1.5 bar Cable length 1.5m Scope of delivery of the sand filter system: - pump - Filter tank with 4-way valve - hose connections - Manometer (shows when the sand filter system needs to be backwashed) - Instructions Functions of the 4-way valve: filter: water is circulated and filtered. Floor suction possible backwash: filter sand is cleaned Rinse: Pipework is cleaned Winter position: all lines are open. Thus, all seals are relieved Wall skimmer and floor vacuum Wall skimmer incl. inlet nozzle, dirt sieve (acts like a pre-filter) and suction plate for floor vacuum cleaner (the steel wall of the pool is already pre-punched for this product.) The inlet nozzle has a flow guide (ball) so that you can determine the flow direction of the cleaned water yourself. Therefore, the nozzle can also be attached next to the skimmer. The effect is similar to that of a nozzle opposite the skimmer. Advantage: You don't need to build the piping around half the pool. Floor vacuum with telescopic rod, floor vacuum brush and floating hose. This is connected to the suction plate of the skimmer. With our pool configurator, you can order our latest model "Skimmer incl. LED underwater spotlight" for an additional charge instead of the normal skimmer. You can find data on this skimmer under item number 22910. Pool ladder steel ladder and PE permanent tarpaulin for round pools Pool ladder for pools with a height of up to 1.20 m, can be shortened if you want to sink the pool. Steps are made of rigid PVC. The pool ladder has four steps on each side. PE swimming pool permanent tarpaulin with cable pull and turnbuckle for summer and winter in dark blue. Pool floor fleece, hoses for connecting the sand filter system to the swimming pool specially treated floor protection fleece, non-rotting to protect the inner pool liner Approx. 6m swimming hose to connect the sand filter system to the steel wall pool