Owatrol Oil Spray - Rust Sealing and Preservation - Metal Care

OWATROL OIL removes rust, preserves and seals. Remove loose rust. Metal with thick layers of rust should be treated as follows: Apply OWATROL OIL, which reaches the stuck-on layers of rust due to its enormous creeping ability through the leaf rust. The hardening of OWATROL-OIL leads to a solidification of the substrate and the loose rust is easy to remove or remove. is repelled by the penetrated OWATROL OIL. What remains is a saturated rust surface that is perfectly prepared for further work.OLD remains OLDThe operating principle of OWATROL-OIL makes it possible to preserve rusty metal in its current condition. In this way, the fashion trend of “rusty everyday objects” can be fully met. Rusty parts remain just as rusty – no more and no less. OWATROL OIL penetrates into the rust pores and displaces air and moisture. The oil dries and closes the pores so that no new moisture can penetrate. The result: rusting process stopped! In addition, weathered/corroded sheet metal, aluminum or lead can be preserved in their current condition. The maximum creeping ability prevents film formation on the surface with the effect that OLD stays OLD.Simply paint metal transparently or in color professionally. Applying paint to rusty metal in an adhesive manner is something that many people think is impossible. But with OWATROL OIL this problem is no longer a problem. Thanks to optimal wetting of the rusty substrate and filling of the porous rust deep down to the healthy metal, the bridge to the following coat of paint is formed. The rusting process is stopped and a permanently beautiful appearance is achieved.Simply professional As a leaf rust remover, rust preservation and rust sealantAdvantages:– Very effective, even where application with a brush is very difficult– Transparent and therefore inspectable rust protection possible– Prevention of layer thickness build-up through natural weathering– Maximum creeping ability down to the healthy metal– Displaces air and moisture from the rust– Optimal preparation for 1-component coatings– Ideal: Owatrol oil in the 300 ml spray can Yield: 8 – 18 sqm/litre