Filters for electric sander 2 in 1 No Dust (5 pcs.)

Set of replaceable filters to absorb dust produced during manicure and nail preparation. Set of 5 replaceable Semilac filters to absorb dust during manicures. Reusable filters are dedicated to electric mouthpieces with Semilac No Dust 2 in 1 dust absorber. Main characteristics of the filters: · Diameter of the filter: 17 cm. · Reusable. · Easy cleaning. A simple way to replace the filter of the Semilac 2 in 1 No Dust cutter with absorber. · Filters are fabric. CHANGING THE FILTER • Make sure the appliance is switched off, then lift the top cover of the filter with holes. • Pull the fabric tab to remove the entire filter. • Insert/insert a new filter, then replace the filter cover. PRECAUTIONS • Unplug the power supply when the cosmetic dust absorber is not in use. • If the filter cover is removed without first disconnecting the power supply, the device will stop working and enter safe mode; the corresponding mode LED will flash. After replacing the filter and replacing the filter cover, the machine will resume operation. • The filter is replaceable; it should be replaced after 2–3 months of use or immediately if damaged. For the device to work properly, it is necessary to clean the filter frequently, preferably after each manicure. After surface treatment, remove accumulated dust, for example by blowing on the filter with compressed air or by shaking it. • Filters should not be wet or moistened.