The PS-40A phase switch is designed to supply industrial and domestic single-phase 220/230V 50Hz consumers from one of the phases of a three-phase network in order to ensure the supply of the most critical single-phase devices from the phase of the highest quality and protect them against overvoltages or undervoltages. The device is controlled by a microcontroller that analyzes the voltage in the three-phase network and displays the actual values on digital indicators for each phase. The output is switched to the load by electromagnetic relays. The device is powered from monitored phases. Programmable settings: – Permissible voltage switching/disconnecting limits – Priority phase – Load transfer delay time – Switching delay time for the lower limit – Delay time to return to the priority phase Specifications: Voltage on each phase, V: 50-400 Load rated current: 40A Maximum load current: 50 A Off/switching time for upper limit, s: not more than 0.02 Off/switching time for lower limit (<120V), s: not more than 0.02 Upper limit of tripping/switching: 210-270 (250*) V Lower cut/switch limit: 120-200 (170*) V Priority Phase: L1,L2,L3 (OFF*) Load on delay time: 0-600s (0*) Switch delay time at lower limit: 1-10 sec (1*) Switching delay time to priority phase: 5-120 sec (5*) Voltmeter accuracy, %: no more than 1 Device protection degree: IP-20 Output control from "sticking" the contact: yes Size: 7 modules DIN rail mounting Warranty 5 years All set values are stored in non-volatile memory.