LED DMX-SPI Decoder 5-24V, Max. 360 watts, incl. Plugs 3-pin XLR

This 5-24V DC DMX-SPI decoder contains an advanced micro control unit that receives the standard DMX-512 digital command signal commonly used around the world and converts it to SPI signals (see manual) to control the LED pixels  to check. This function can handle up to 25 different IC models of lamps. The DMX signal port features protect against lightning strikes. The DMX module can be connected to the DMX console for extra power or to change procedures. Furthermore, it can be set using a dip switch. Using this decoder you can use a DMX signal to control the individual pixels of a digital LED neon flex / LED strip with IC chips. This decoder is therefore ideal for use in combination with digital LED neon flex / LED strip. With one decoder you can control 170 pixels, for this the decoder uses 3 channels per pixel, so a total of 512 DMX channels. You can use multiple decoders for larger projects. The decoder supports the following protocols: LPD6803, LPD8806, TM1803, TM1809, TM1812, WS2811, WS2801, TLS3001, TLS3002, P9813, etc. For an extensive view, see the manual.Technical Parameters1) Working temperature: -20-60 degrees Celsius2) Supply voltage: 5V - 24VDC3) Output: CLK, RCK, DATA, GND4) External size: L125 X W52 X H40 (mm)5) Net weight: 315 g6) Static power consumption: < 1W7) Output power: 12V: < 180W, 24V: < 360W Corresponding power supplies for this DMX converter. Suitable for: 24V DMX RGB LED Neon / LED strip with 60 LEDs per meter.The manual can be found under the appendices tab.InstallationSee the second and third image for the installation diagram.If you place your order on working days before 4:00pm and pay, we will ship it the same day for free. In addition, with Groenovatie you always have a 2 year warranty and 60 days right of return!