DMX RGB LED Neon Flex 24V, 1 Meter, 8 Watt/meter, Waterproof IP65

The ultimate LED lighting for direct view. This DMX 24 Volt LED Neon Flex with IC chips WS 2811 and High Brightness Epistar RGB LEDs (120 pieces per meter) is suitable for indoor and outdoor use. It has an IP value of 65 and is easy to install, with a 24V transformer and DMX controller. If you use it outdoors, you should glue the connections closed with, for example, silicone glue. Plug & Play! This 1 meter LED hose is also called LED Neon Flex . Due to the large number of LEDs per meter (120 pieces) and the diffuse hose around the strip, the bright appearance of the hose and the bright colors such as blue, green and red, are comparable to traditional (old) neon lighting. Because the hose is flexible, they can be bent into various bends and angles. Not only is the flexibility a great advantage, but the consumption is also relatively low compared to the old neon lighting. With a consumption of only 8W per meter, this DMX RGB LED Neon Flex hose consumes very little energy! The LED Neon Flex hose is supplied separately per meter including 1 end cap, you can add a 24V LED transformer to your shopping cart yourself . The DMX 24V RGB Neon Flex hose can be cut per 10cm. This is shown on the hose with dots. 3 wires come out of the LED Neon Flex: - Red: + (plus) - Black: - (minus) - Green: Data For example, if you want to order 8 meters, fill in the quantity "8" in. By replacing your current lighting with an LED alternative, your energy consumption will be reduced by 70%. This energy saving allows you to earn back your investment in 1.5 years! Specifications Suitable for Indoor and outdoor (IP67) Light color RGB      Power in Watts 8 Watts/meter Luminous flux (Lumen) 700 lumens/meter Number of LEDs per meter 120 LED type SMD 2835 Energy efficiency class A++, A+, A (Built-in LED) Dimmable Yes Operating voltage DC 24V IP value IP65 Beam angle 120 Degrees Color Rendering Index (CRI)      >80 Quality mark CE, Rohs Warranty 2 years Dimensions 1000 x 12 x 28 mm Can be shortened Per.10 cm Article number ST50503456-NDMX InstallationPlug and play! You just need to connect a DMX controller and a 24V LED transformer and click into the 24V LED Neon Flex. The dimensions are shown in an illustration below: The LED Neon hose can also be mounted in an aluminum profile, so that it remains stable and straight. See illustration below: If you place your order on working days before 4:00pm and pay, we will ship it the same day for free. In addition, at Groenovatie you always have a 2 year warranty and 30 days right of return!