LED Neon Flex 230V, Blue, 1 Meter, 8 Watt/meter, Waterproof IP67

The ultimate LED lighting for direct view. This blue 230 Volt LED Neon Flex with High Brightness Epistar red LEDs (120 pieces per meter) is suitable for indoor and outdoor use. It has an IP value of 67 and is easy to install, without a transformer or the like, directly on 230V. If you use this outside, you should glue the connections closed with, for example, silicone glue. Plug & Play! This 1 meter LED hose is also called LED Neon Flex . Due to the large number of LEDs per meter (120 pieces) and the diffuse hose around the strip, the bright appearance of the hose and the clear blue light color is comparable to traditional neon lighting. Because the hose is flexible, they can be bent into various bends and angles. Not only is the flexibility a great advantage, but the consumption is also relatively low compared to the old neon lighting. You can use it well for outdoor illuminated advertising. With a consumption of only 14.4W per meter, this single-colour LED Neon Flex hose consumes very little energy! The blue LED Neon Flex hose is supplied including 1 end cap. The Neon flex hose can be cut per meter. This is clearly indicated on the hose. For example, if you want to order 8 meters, fill in the quantity "8" in. Then you will receive one piece of 8 meters. By replacing your current lighting with an LED alternative, your energy consumption will be reduced by 70%. This energy saving enables you to recoup your investment in 1.5 years!Specifications Suitable for Indoor and Outdoor (IP67)  Light color Blue Power in Watt 8 Watt/meter Luminous flux (Lumen) 700 lumen/meter Number of LEDs per meter 120 LED type SMD 2835 Energy efficiency class A++, A+, A (Built-in LED) Dimmable Yes Operating voltage AC 230V IP value IP67 Beam Angle 120 Degrees Color Rendering Index (CRI)      >80 Quality mark CE, Rohs Warranty 2 years Dimensions 1000 x 14 x 28 mm Minimum bending diameter 80 mm Power Factor >0.95 Can be shortened Per 1 meter Article number ST5050347251-N-B InstallationPlug and play! All you need to do is plug in, glue and click a single color connector plug into the LED Neon Flex. After this you can connect the plug to 230V power. The dimensions are shown in an illustration below: The LED Neon hose can also be mounted in an aluminum profile, so that it remains stable and straight. See illustration below: If you place your order on working days before 20:00 and pay, we will ship it the same day for free. In addition, with Groenovatie you always have a 2 year warranty and 60 days right of return!