LED Neon Flex 230V, Cool White, 1 Meter, 8 Watt/meter, Waterproof IP67

What you see here is nothing less than the ultimate LED lighting in plain sight. The cool white 230 volt LED neon flex has High Brightness Epistar LEDs that provide a cool white light and can be used both indoors and outdoors. The IP value of 67 ensures that it is completely waterproof and that no dust and the like can get in. It is very easy to install and does not require a transformer. It's just plug and play, connect it to 230 volts and it's on. If you use it outside, you should glue the connections closed with, for example, silicone glue. The LED hose is 1 meter in length and is also called LED neon flex&nbsp ;mentioned. There are 120 LEDs per meter on it. Partly because of this and because of the diffuse hose around the strip, it has a very bright appearance of cool light. It's just like traditional neon lighting. The hose is completely flexible, so you can install it anywhere and in all kinds of bends. The consumption is also quite low compared to other neon lighting. These types of LED hoses are very good to use as outdoor illuminated advertising on the facade of, for example, your company. It consumes only 8 Watts per meter, which means that the energy consumption is very low. If you replace your current lighting with an LED replacement, the energy consumption will decrease by 70%. An energy saving that will allow you to earn back the purchase in a year and a half. You can also contact LEDshop Groenovatie for other colors of LED hose. Please feel free to take a look to see what other options are available. And if you have any questions about it, don't hesitate to ask. The LED Neon flex hose comes with 1 end cap. The Neon flex hose can be cut per meter. This is clearly indicated on the hose. For example, if you want to order 8 meters, fill in the quantity "8" in. Then you will receive one piece of 8 meters.Specifications Suitable for Indoor and outdoor (IP67) Light color Cool White (6000K-6500K)     Power in Watts 8 Watts/meter Luminous flux (Lumen) 700 lumens/meter Number of LEDs per meter 120 LED type SMD 2835 Energy efficiency class A++, A+, A (Built-in LED) Dimmable Yes Operating voltage AC 230V IP value IP67 Beam angle 120 Degrees Color Rendering Index (CRI)      >80 Quality mark CE, Rohs Warranty 2 years Dimensions 1000 x 14 x 28 mm Minimum bending diameter 80 mm Power Factor >0.95 Can be cut off Per 1 meter Article number ST5050347256-N InstallationPlug and play! All you need to do is plug in, glue and click a single color connector plug into the LED Neon Flex. After this you can connect the plug to 230V power. The dimensions are shown in an illustration below: The LED Neon hose can also be mounted in an aluminum profile, so that it remains stable and straight. See illustration below: If you place your order on working days before 20:00 and pay, we will ship it the same day for free. In addition, at Groenovatie you always have a 2 year warranty and 60 days right of return!