LED PIR Motion Detector/Sensor Two-wire Recessed Wall, IP20, White

The PIR motion detector or motion sensor you see here is suitable for wall mounting. It has a viewing angle of no less than 140 degrees. And all this with a range of up to 10 meters. It has a light beige color. If this PIR motion sensor from Groenovatie registers a movement, the lighting to which it is connected will switch on immediately. The lighting will switch off again after the time you have set, as soon as no movement can be detected. The time for this is very easy to set between 5 seconds and 7 minutes. He can also stay. To do this, you need to turn on the slider on the front. Furthermore, the light sensitivity is also adjustable between 3 and 1000 Lux. It is useful for example in the toilet, so that the light switches on automatically as soon as you enter the toilet room. The PIR motion detector is not only suitable for LED lighting, but also traditional lighting. The load for incandescent and halogen lamps is a maximum of 500W and the input voltage is 110-240V. The PIR motion detector is connected in two wires. It is ideal for use in areas such as toilets, closets and other rooms. The dimensions of the PIR motion sensor are 80x80x44 mm. If you use this motion sensor you will of course already save money on your energy costs. But in combination with LED lighting, this saving will only increase. In addition, you ensure that you also have some extra money in your wallet if you buy it at LEDshop Groenovatie. Because with us, in addition to warranty, you will also receive it for a competitive price.   - range: max. 10 m (< 22 °C)        - speed: 0.6 - 1.5 m/s - Duty cycle: adjustable from 5s to 7 mins (± 60s)  / Always on / Always off - Sensitivity: 3-1000 lx (adjustable) - Max. load: 500 W (incandescent lamps) / 300 W (LED lamps) - Power supply: 110-240 VAC / 50 Hz Installation1. This flush-mounted wall motion detector is a two-wire wall-mounted infrared detector that fits into most standard flush-mounted boxes (no neutral wire required). The L (phase; brown or black) wire of the mains supply (230V) must be installed in the L-in input of the sensor.3. The switch wire (black) of the lamp must be installed in the switch input of the sensor. If you place your order on working days  before 20:00 and pay, we will ship it the same day&nbsp ;free shipping (with order >€20). In addition, with Groenovatie you always have a 2 year warranty and 60 days right of return!